Convective vortices (whirlwinds) and dust devils (dust-loaded vortices) are one of the most common phenomena on Mars, observable on a daily basis. They reflect the local thermodynamical structure of the atmosphere and are the driving force of the dust cycle. Additionally, they cause an elastic ground deformation, which is useful for retrieving the subsurface rigidity. Therefore, investigating Martian convective vortices with the right instrumentation can lead to a better understanding of the Martian atmospheric structures as well as the subsurface physical properties. In this study, we quantitatively characterized the convective vortices detected by NASA’s InSight mission (~13,000 events) using both meteorological (e.g., pressure, wind speed, temperature) and seismic data. The evaluated parameters, such as the signal-to-noise ratio, event duration, asymmetricity of pressure drop profiles, and cross-correlation coefficient between seismic and pressure signals, are compiled as a catalog. To demonstrate how our catalog can contribute to scientific investigations, we show two analysis results about (i) asymmetrical features seen in the vortex-related pressure drops and (ii) atmospheric-ground interaction to retrieve the subsurface physical properties.

The instrument package SEIS (Seismic Experiment for Internal Structure) with the three very broadband and three short-period seismic sensors is installed on the surface on Mars as part of NASA’s InSight Discovery mission. When compared to terrestrial installations, SEIS is deployed in a very harsh wind and temperature environment that leads to inevitable degradation of the quality of the recorded data. One ubiquitous artifact in the raw data is an abundance of transient one-sided pulses often accompanied by high-frequency spikes. These pulses, which we term “glitches”, can be modeled as the response of the instrument to a step in acceleration, while the spikes can be modeled as the response to a simultaneous step in displacement. We attribute the glitches primarily to SEIS-internal stress relaxations caused by the large temperature variations to which the instrument is exposed during a Martian day. Only a small fraction of glitches correspond to a motion of the SEIS package as a whole caused by minuscule tilts of either the instrument or the ground. In this study, we focus on the analysis of the glitch+spike phenomenon and present how these signals can be automatically detected and removed from SEIS’ raw data. As glitches affect many standard seismological analysis methods such as receiver functions, spectral decomposition and source inversions, we anticipate that studies of the Martian seismicity as well as studies of Mars’ internal structure should benefit from deglitched seismic data.

Since landing on Mars, the NASA InSight lander has witnessed 8 Phobos and one Deimos transit. All transits could be observed by a drop in the solar array current and the surface temperature, but more surprisingly, for several ones, a clear signature was recorded with the seismic sensors and the magnetometer. We present a preliminary interpretation of the seismometer data as temperature induced local deformation of the ground, supported by terrestrial analog experiments and finite-element modelling. The magnetic signature is most likely induced by changing currents from the solar arrays. While the observations are not fully understood yet, the recording of transit-related phenomena with high sampling rate will allow more precise measurements of the transit times, thus providing additional constraints for the orbital parameters of Phobos. The response of the seismometer can potentially also be used to constrain the thermo-elastic properties of the shallow regolith at the landing site.