A document by yufei wang. Click on the document to view its contents.

Geological Carbon Sequestration mitigates climate change by capturing and storing carbon emissions in deep geologic formations. Dissolution trapping is one mechanism by which CO2 can be trapped in a deep formation. However, heterogeneity can significantly influenced dissolution efficiency. This work addresses the injection of CO2 in perfectly stratified saline formations under uncertainty. Monte Carlo two-phase flow compositional simulations involving the dissolution of CO2 into brine and evaporation of water into the CO2-rich phase are presented. We systematically analyzed the interplay between heterogeneity and buoyant forces, which is shown to control the migration of the CO2 plume as well as the temporal evolution of dissolution efficiency. Results show that when buoyant forces are important, vertical segregation controls the overall behavior of CO2, diminishing the influence of small-scale heterogeneity on dissolution. However, when buoyant forces are relatively small compared to the degree of heterogeneity, CO2 migrates preferentially through high permeability layers and dissolution efficiency increases with heterogeneity due to the stretching of the CO2 plume that enhances mixing. As a result, in this situation, the upscaling of permeability leads to an underestimation of the dissolution efficiency. A review of field sites shows that dissolution is heterogeneity-controlled in most real systems. Knowing that most numerical models cannot afford to represent heterogeneity at an adequate scale, results indicate that dissolution efficiency can be typically underestimated by a factor close to 1.5.

Aquifer remediation with in situ soil washing techniques and enhanced oil removal typically involve the injection of liquid solutions into the geological formation to displace and mobilize non-aqueous phase liquids (NAPLs). The efficiency of these systems is oftentimes low because the displacing fluid bypasses large quantities of NAPL due to the inherent complexity of a heterogeneous natural system. Here, chaotic advection generated by a rotating periodic injection pulse is proposed as a method to enhance NAPL removal and mixing. To evaluate the method, we perform two-phase flow simulations in multiple realizations of random permeability fields with different correlation structures and connectivity between injection and extraction wells embedded in a five-spot pattern. Results show that chaotic advection can significantly improve removal efficiency and mixing depending on several controlling factors. Chaotic advection effects are more significant under unfavorable conditions, i.e., when injection and extraction wells are well-connected through preferential channels, permeabilities are highly heterogeneous, and/or the mobility ratio between the wetting and the non-wetting fluid is larger than one. Removal efficiency reaches its maximum value when the Kubo number is close to one, i.e., when the saturation front travels one range of the permeability field in an injection pulse. These effects can develop in just a few cycles. However, removal efficiency should undergo first an early stage with detrimental effects in order to maximize removal in the long term. Chaotic advection not only enhances NAPL removal and mixing, but also reduces the uncertainty, making the system more reliable and less dependent on heterogeneity.