loading page

Isolating the impacts of urban form and fabric from geography on urban heat and human thermal comfort
  • +6
  • Kerry Nice,
  • Negin Nazarian,
  • Mathew Lipson,
  • Melissa Hart,
  • Sachith Seneviratne,
  • Jason Thompson,
  • Marzie Naserikia,
  • Branislava Godic,
  • Mark Stevenson
Kerry Nice
Transport, Health, and Urban Design Research Lab, Faculty of Architecture, Building, and Planning, University of Melbourne, VIC, Australia, Transport, Health, and Urban Design Research Lab, Faculty of Architecture, Building, and Planning, University of Melbourne, VIC, Australia

Corresponding Author:[email protected]

Author Profile
Negin Nazarian
University of New South Wales, University of New South Wales
Author Profile
Mathew Lipson
Australian Bureau of Meteorology, Australian Bureau of Meteorology
Author Profile
Melissa Hart
University of New South Wales, University of New South Wales
Author Profile
Sachith Seneviratne
Transport, Health, and Urban Design Research Lab, Faculty of Architecture, Building, and Planning, University of Melbourne, VIC, Australia, Transport, Health, and Urban Design Research Lab, Faculty of Architecture, Building, and Planning, University of Melbourne, VIC, Australia
Author Profile
Jason Thompson
{Transport, Health, and Urban Design Research Lab, Faculty of Architecture, Building, and Planning, University of Melbourne, VIC, Australia, {Transport, Health, and Urban Design Research Lab, Faculty of Architecture, Building, and Planning, University of Melbourne, VIC, Australia
Author Profile
Marzie Naserikia
ARC Centre of Excellence for Climate Extremes, University of New South Wales, Sydney, NSW, Australia, ARC Centre of Excellence for Climate Extremes, University of New South Wales, Sydney, NSW, Australia
Author Profile
Branislava Godic
The University of Melbourne,Monash University,The University of Melbourne, The University of Melbourne,Monash University,The University of Melbourne
Author Profile
Mark Stevenson
The University of Melbourne, The University of Melbourne
Author Profile

Abstract

Public health risks resulting from urban heat in cities are increasing due to rapid urbanisation and climate change, motivating closer attention to urban heat mitigation and adaptation strategies that enable climate-sensitive urban design and development. These strategies incorporate four key factors influencing heat stress in cities: the urban form (morphology of vegetated and built surfaces), urban fabric, urban function (including human activities), and background climate and regional geographic settings (e.g. topography and distance to water bodies). The first two factors can be modified and redesigned as urban heat mitigation strategies (e.g. changing the albedo of surfaces, replacing hard surfaces with pervious vegetated surfaces, or increasing canopy cover). Regional geographical settings of cities, on the other hand, cannot be modified and while human activities can be modified, it often requires holistic behavioural and policy modifications and the impacts of these can be difficult to quantify. When evaluating the effectiveness of urban heat mitigation strategies in observational or traditional modelling studies, it can be difficult to separate the impacts of modifications to the built and natural forms from the interactions of the geographic influences, limiting the universality of results. To address this, we introduce a new methodology to determine the influence of urban form and fabric on thermal comfort, by utilising a comprehensive combination of possible urban forms, an urban morphology data source, and micro-climate modelling. We perform 9814 simulations covering a wide range of realistic built and natural forms (building, roads, grass, and tree densities as well as building and tree heights) to determine their importance and influence on thermal environments in urban canyons without geographical influences. We show that higher daytime air temperatures and thermal comfort indices are strongly driven by increased street fractions, with maximum air temperatures increases of up to 10 and 15◦C as street fractions increase from 10% (very narrow street canyons and/or extensive vegetation cover) to 80 and 90% (wide street canyons). Up to 5◦C reductions in daytime air temperatures are seen with increasing grass and tree fractions from zero (fully urban) to complete (fully natural) coverage. Similar patterns are seen with the Universal Thermal Climate Index (UTCI), with increasing street fractions of 80% and 90% driving increases of 6 and 12◦C, respectively. We then apply the results at a city-wide scale, generating heat maps of several Australian cities showing the impacts of present day urban form and fabric. The resulting method allows mitigation strategies to be tested on modifiable urban form factors isolated from geography, topography, and local weather conditions, factors that cannot easily be modified.